gps wг. Минск, 4-й пер. Кольцова, 51-318

mail w1nektis@mail.ru

mail winfo@nektis.by

Датчик безопасности Keyence GL-T11R

COM_VIRTUEMART_PRODUCT_NOSTOCK
ModelGL-T11R
Applicable modelGL-R Series
Relay outputFSD1,2250 VAC 6 A 30 VDC 6 A (Resistance load)
240 VAC 2 A (COSo=0.3) (Inductive load)
24 VDC 1 A (COSo=0.3) (Inductive load)
Life-spanElectrical life-span100,000 cycles or more with 250 VAC 6 A resistance load
(open/close frequency: 20 times/minute)
100,000 cycles or more with 30 VDC 6 A resistance load
(open/close frequency: 20 times/minute)
500,000 cycles or more with 250 VAC 1 A resistance load
(open/close frequency: 30 times/minute)
500,000 cycles or more with 30 VDC 1 A resistance load
(open/close frequency: 30 times/minute)
AC15: 100,000 cycles or more with 240 VAC 2 A inductive load
(open/close frequency: 20 times/minute, coso = 0.3)
DC13: 100,000 cycles or more with 24 VDC 1 A inductive load
(open/close frequency: 20 times/minute, L/R = 48 ms)
Response timeON>OFFGL-R +10 ms
OFF>ONGL-R +32 ms
Supplemental output
(Non-safety-related output)
AUXTransistor output (PNP/NPN input device can be connected.)*1
50 mA max., residual voltage 2.5 V max.
(When the cable between the GL-R and GL-T11R is 5 m)
Error output
Muting lamp outputIncandescent lamp (24 VDC, 1 to 5.5 W)
LED lamp (load current: 10 to 230 mA) can be connected.
External inputEDM inputWait inputReset inputMuting input 1, 2Override inputON voltage: [Power supply voltage – 5 V] to [Power supply voltage]OFF voltage: Open or 0 to 3 V
Short circuit current: Approx. 2.5 mA
(Approx. 10 mA with EDM input only)
RatingPower voltage24 VDC ±10%, ripple (P-P) 10% or less, Class 2
Current consumption100 mA max. (24 VDC, GL-T11R only)
Approved standardsEMCEMSEN61496-1, UL61496-1, IEC61496-1
EMIEN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
SafetyEN61496-1, UL61496-1, IEC61496-1 (Type4 ESPE)
EN ISO13849-1 : 2015 (Category4, PLe)
UL508, EN50178
Environmental resistanceEnclosure ratingIP20 (IEC60529)
Must be installed within a control panel rated at IP54 or higher.
Pollution degree2
Overvoltage categoryIII
Operating ambient temperature-10 to +55 °C (No freezing)
Storage temperature-25 to +60 °C (No freezing)
Operating relative humidity15 to 85 % RH (No condensation)
Storage relative humidity15 to 95 % RH
Altitude2,000 m or less
Vibration resistance10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions
Shock resistance100 m/s2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
MaterialMain unit casePolycarbonate
WeightApprox. 310 g
*1 The output operation is the same as that when the PNP output type cable is used.